Description

Product Description
Specification:
Product model: SFD-FM02
Bluetooth-Compatible version: V5.3
Working voltage: 5V
Effective distance: within 10 meters
Audio output: FM transmitter
FM frequency range: 87.5MHZ-108MHZ
Default frequency: 95.0MHz
Signal to noise ratio: ≥ 95db
Answer phone calls: Supported
Automatic backflow connection: supported
Power mode: USB power supply (5V)
Product size: about 32 * 17 * 10mm/1.25 * 0.66 * 0.39inch
Gross weight: 9g
Button Description:
Multi function M button:
1. To adjust the FM frequency, press and hold the M button, and the screen will start flashing to enter FM adjustment mode. Long press or short press the "+" and "-" buttons to quickly and slowly adjust. After the adjustment is completed, click the M button to confirm, and the screen will stop flashing.
2. When playing a song, click the M button to pause playback.
3. Answer the call: When someone calls, you can click the M button to answer the call.
Multifunctional "+" and "-" buttons
1. "+" button: Click on the next song, long press to increase the volume, and in FM adjustment mode, click and long press to adjust the FM channel.
2. "-" button: Click on the previous song, long press to lower the volume, and in FM adjustment mode, click and long press to adjust the FM channel.
Instructions:
1. Insert FM02 into the USB interface in the car, with an output voltage of 5V.
2. Use the multi-functional M button to set the FM frequency band, then turn on the car radio and adjust the FM frequency band of the radio to match the FM frequency band of FM02.
3. FM02 has an automatic memory function for FM frequency, which defaults to the last used FM frequency every time it is turned on.
After setting the FM frequency band, find the Bluetooth-Compatible pairing name FM02 in the Bluetooth-Compatible settings of your phone and click to pair. Then the music played by the phone will be played on the car’s speakers.
5. Adjusting the volume: When playing music, the phone’s music volume can be adjusted to its maximum
Adjust the car volume to a moderate level. It is not recommended to turn up the car volume too much, as the higher the car volume, the more severe the noise and distortion.
Attention:
1. The default frequency band of FM02 is 95.0MHz, which can be used directly. If there is a lot of playback noise, it can be adjusted to other frequency bands.
2. When the radio of certain car models is turned on, the built-in USB interface in the car will be turned off. At this point, if FM02 is inserted into the built-in USB port, it cannot be used. In this case, you can plug FM02 into the USB of the lighter and car charger. Use a power supply on the interface (the output voltage of the USB must be 5V).
3. FM02 may be too noisy or unusable in some original cars with USB interfaces. It is recommended to insert FM02 into the cigarette lighter car charger for use.
4. FM02 does not have an automatic shutdown function. It is recommended to unplug it from the USB interface when not in use.
5. When FM02 cannot be searched in the Bluetooth-Compatible settings of your phone, or cannot be paired after searching and clicking, it is recommended to clear the previously connected Bluetooth-Compatible devices in your phone, then restart your phone and try again.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Car FM Transmitter Receiver