Description

Product Description
Specification:
Origin: Mainland China
DIY Supplies: ELECTRICAL
For for tinySA is a portable spectrum analyzer developed by Dutch developer Erik Kaashoek. After we launched NanoVNA, the community has always hoped to have a portable spectrum analyzer similar to it, and now we have manufactured it using the same volume and cost as NanoVNA.
Attention!!!
Input signals exceeding the damaged power (20dBm (100mW)) will damage for tinySA. Please connect a suitable attenuator when testing the transmitter!
For tinySA is not an SDR receiver and does not provide any receive demodulation function!
For tinySA is not a frequency scanner and does not provide tracking source output. If you need a frequency scanning function, please use NanoVNA!
Basic parameter information
1. Display: 2.8 inches, 320×240, resistive touch
2. Low input port (high performance): 100kHz 350MHz
3. High input port (performance limited): 240MHz -960MHz
4. Resolution filter: from 3kHz to 600kHz
5. Low output port (sine wave): 350MHz
6. Low output port power: -76dBm to -7dBm
7. High output port (square wave): 240MHz -960MHz
8. High output port power: -32dBm to 16dBm
9. Displayed scan points: max 290
10.0-350MHz fastest scanning time: 405ms
11. Minimum zero sweep time: 1.8ms
12. Low input port display average noise level: -146dBm/Hz
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Handheld Spectrum Analyzer (Please Refer To The Description For Specific Specifications)